Properties/Application
MEM Allwetter-Dicht is a solvent-based special sealant for repairing small joints and cracks between stone, concrete and metal, for sealing leaks in gutters and downpipes. Also suitable as a roof sealant for gluing and sealing as an emergency repair.
MEM all-weather seal is perfect for extreme outdoor use
MEM Allwetter-Dicht achieves good adhesion to most materials commonly used in construction, even to wet substrates and bitumen, and also adheres to damp, absorbent and non-absorbent substrates without a primer.
MEM Allwetter-Dicht is UV-resistant and can be painted over
underground and processing
All surfaces must be clean and free from dirt, dust, moss, oil, grease and other loose materials
Adhesion tests are recommended prior to application
Spray out MEM all-weather seal evenly with pressure
Hints
MEM Allwetter-Dicht is only to be used outdoors and in well-ventilated areas
MEM Allwetter-Dicht is not suitable for PE, PP, PC, PMMA, PTFE, soft plastics and neoprene.
consumption
With a joint cross-section of 10 x 10 mm, one cartridge is sufficient for approx. 3 running meters.
processing temperature
From + 5°C to +40°C
material composition
Solvent-based special sealant
Technical specifications
shape
pasty
density
0.95g/cm³
main education time
approx. 3 to 5 min. ( +23°C / 50% r. F.)
temperature resistance
approx. -25°C to +100°C
cleaning
Once set, MEM Allwetter-Dicht can only be removed mechanically
Safety instructions
The hazard warnings and safety advice on the containers and in the safety data sheets must be observed
storage
MEM BAU-ACRYL must be stored in a frost-free, cool and dry place. Keep unused material tightly closed in the original container.
MEM BAU-ACRYL can be kept for approx. 48 months in the unopened original container if stored properly
disposal
Only give empty cartridges for recycling