Solvent-free, fibrous sealing compound for sealing chimney and wall connections as well as roof penetrations. For repairing cracks, joints, valleys, etc.
Properties/ Application
MEM roof and joint seal is a solvent-free, fibrous bitumen joint compound for repairing cracks, joints, valleys, etc. and for sealing chimney and wall connections, roof antennas, openings, etc. in the roof area.
MEM roof and joint seal achieves good adhesion to many substrates, such as concrete, metal, zinc bitumen sheeting, fiber cement, etc.
substrate and processing
The substrate must be solid, clean, dry, and free of grease and frost.
In the case of porous substrates, a primer should be applied with MEM primer.
After the primer has dried completely, MEM Dach- und Fugendicht is applied with a suitable applicator. To do this, cut off the tip of the thread, shorten the plastic nozzle to the desired diameter and screw it on.
The treated surface should be protected from moisture until it has hardened.
Technical specifications
Consumption 1 cartridge is sufficient for approx. 3m with a joint cross-section of 10 x 10 mm
Material composition Pastpse bitumen compound based on aqueous dispersion
Color: Black
Form pasty
smell weak
Density 1.3g/cm³
cleaning
Fresh, not yet hardened material with water
Safety instructions
The hazard warnings and safety advice on the containers and in the safety data sheets must be observed.
storage
MEM Dach- und Fugendicht has a shelf life of at least 24 months in the closed original container when stored frost-free.