MEM DICHT-BAND is used for the permanent sealing of connecting and corner joints, e.g. B. in the kitchen, bathroom, balcony and terrace. Ideal in combination with MEM BARRIER LAYER.
Properties / Application:
MEM DICHT-BAND is used for the permanent sealing of connecting and corner joints.
The MEM DICHT-BAND is particularly suitable for e.g. kitchens, bathrooms, balconies, terraces etc. and can be combined particularly well with the products MEM SPERR-SCHICHT, MEMBITUMEN DACH-SPERRE and MEM TROCKENER KELLER.
mode of action:
Due to its tear-resistant, flexible and permanently hard-wearing properties, the MEM DICHT-BAND is particularly suitable for sealing particularly stressed areas, such as corners.
Subsoil and processing:
Pre-treat the surface to be sealed with the sealing compound according to the instructions for use. Then paint the walls and/or masonry up to approx. 7 cm beyond the joints.
Using a spatula, press the MEM DICHT-BAND cut to the right length onto the joint in the middle of the still wet sealing compound so that the carrier material is completely penetrated.
Then apply another layer of waterproofing wet-on-wet and allow to dry.
If necessary (see instructions for use of the sealant) a second layer should be applied.
After drying, the surface can be coated with tile adhesive, for example, and covered with ceramic tiles or further processed
Technical specifications
Consumption 1m / running meter
Processing temperature Depends on the processing temperature of the sealing compound
Color white (carrier material) and gray (sealing zone)
Form Sealing tape on a roll
Total width 120mm
Length 5m
Wide sealing zone 70 mm
Tensile strength 3.5 N/mm²
Material composition The MEM DICHT-BAND consists of EPDM rubber and PP fleece
Safety notes:
The hazard warnings and safety advice on the containers and in the safety data sheets must be observed.
Storage:
Store MEM DICHT-BAND cool, dry and protected from mechanical stress.
