MEM professional spatula lmf bitumen 7.0 kg bitumen compound, repair compound no. 500831 bitumen repair compound

MEM PROFI SPACHTELMASSE lmf is a high-quality, polymer-modified bitumen-based repair and filler compound. MEM PROFI SPACHTELMASSE lmf is suitable outdoors for repairing bitumen roofing membranes, blisters, holes, cracks and fractures, for repairing roof valleys, etc. Bitumen roofing membranes and coatings, concrete, plaster, Mauserwerk, screed, metal, etc. are suitable as a substrate.

Properties/ Application

    MEM PROFI putty is a high-quality, polymer-modified bitumen-based repair and putty.
    MEM professional filler is suitable outdoors for repairing bitumen roof membranes, blisters, holes, cracks and fractures, for repairing roof valleys, etc.
    Bitumen roofing membranes and coatings, concrete, plaster, masonry, screed, metal, etc. are suitable as a substrate.
    MEM Profi filler can be used on horizontal and vertical surfaces.

substrate and processing

    The substrate to be treated must be dry, clean and free from oil and grease as well as loose components. Remove rust.
    Pre-treat highly absorbent substrates with MEM bitumen primer.
    MEM PROFI SPACHTELMASSE can be applied with a spatula, trowel or trowel.
    Cut open blisters to be repaired, melt and fill the edges. Then fill with MEM Profi filler, if necessary in connection with reinforcement fabric.
    Let the filler run out flat at the edges.

Hints:

    Avoid exposure to water and the effects of frost until it is completely dry. A maximum of 4 mm is to be applied in one operation, for faster hardening it is recommended to apply 2x 2 mm.
    Drying time approx. 1 mm per 24 hours at 23°C and 55% rel. humidity
    Do not use in permanently standing water

Technical specifications

consumption
approx. 1.4 kg /m² and mm layer thickness
Processing temperature +5°C to +30°C (avoid direct sunlight)
Material composition Sealing compound based on bitumen
Form pasty
Color: Black
Odor faint, characteristic
density
1.5 g/cm³

cleaning

    Tools can be cleaned with water when fresh.

Safety instructions

    The hazard warnings and safety advice on the containers and in the safety data sheets must be observed.