MEM Tight Fix sealing sealant 375g No. 500220 waterproof sealant

The sealant for all small repairs and sealing measures. MEM Seal Fix is ​​highly elastic, dralon and carbon fiber reinforced, free from bitumen, tar and asbestos. Immediately absolutely waterproof, even in rain, snow and frost down to -5°C. MEM Dicht-Fix is ​​permanently elastic, easy to process, can be brushed and spatulated, crack-bridging up to 10 mm, UV-resistant and does not become porous. Adheres to all structural surfaces, including damp or wet surfaces.
 
Properties / Application
 
    MEM SEAL-FIX is suitable for sealing leaks and smaller leaks, ideally suited for roof/flat roof problems.
    MEM DICHT-FIX adheres to all common substrates such as roofing felt, welding membranes, fiber cement building materials, tar, aluminium, copper zinc, lead, stone, brick, clay, slate, concrete, pond liner, tiles, plastics, wood, not on polystyrene and PE .
    MEM DICHT-FIX is crack-bridging up to 10 mm, UV-resistant, bitumen, tar, asbestos-free and also adheres to damp / wet substrates
 
mode of action
 
    MEM DICHT-FIX is a ready-to-use sealing compound based on high-quality, natural and synthetic resins. MEM DICHT-FIX is dralon and carbon fiber reinforced.
    MEM DICHT-FIX forms a waterproof protective layer immediately after application, which hardens at temperatures down to -5°C and in fog.

underground and processing
 
    Clean dirt, moss, grease and oil from the surface. Roughen smooth surfaces.
    Stir MEM DICHT-FIX well before use.
    Apply undiluted and thickly with a wide brush or spatula.
    after drying (approx. 2 hours) a second layer can be applied in critical cases.
    Open cracks should be filled with foam or MEM armor fleece, work in larger cracks with MEM armor fleece.
    Depending on the weather, the surface can be worked on after 12-24 hours and can, for example, be painted over with acrylic paint or treated with concrete, mortar screed or tile adhesive.
    To make it walkable, it is recommended to sprinkle the last layer with quartz sand or similar. Depending on the weather, the surface can be walked on after 1-2 days.

Technical specifications

Consumption approx. 2 L/m²
Processing temperature -5°C to +38°C
Material composition Sealing compound consisting of a resin solution and inorganic fillers
Form pasty
Color gray
Odor like petrol
Density 1.25 g/ml
 
cleaning
 
    Clean tools with nitro thinner.
 
Safety instructions
 
    The hazard warnings and safety advice on the containers and in the safety data sheets must be observed
 
storage
 
    MEM SEAL-FIX must be stored in a dry and frost-free place, unused material must be kept sealed in the original container.
    MEM DICHT-FIX can be kept for approx. 48 months in the sealed original container if stored properly.